Archive for pavedwave longboarding distance longboarding, flatland pumping, cross-country adventuring, boardwalk cruising, and all things skateboarding and good times
 



       pavedwave longboarding Forum Index -> Setups - completes, components, and everything else
pavedwave

Random data - How much does your setup weigh?

We have a really accurate scale at work for postal transactions, and it's good up to around 25 lbs, so I figured, just one more chunk of data to geek out on  Very Happy

1. Roe Mermaid Medium Flex, 77mm BlackOps Vents 83a, Bennett front, Splitfire rear.  8 lbs, 9 oz total.

2. Roe Mermaid Light Flex, 77mm BlackOps Vents 80a, Bennett front, Seismic rear with Med Green springs.  7 lbs, 15 oz total.

3. Custom "Pinky" foamcore from Bryan, 76mm Abec11 Pink Gumballs, Bennett front, Seismic rear with Med Green springs.  7 lbs - total!
Hanael

FrankenGalac w/EW sballs, bennet5.0/129tracker, Cambiar Brackets - 4.9 kgs / 10.8 lbs...well, 10 lbs 12 oz.




damn that's quite heavy.
pavedwave

Roe Mermaid Light Flex, 75mm BlackOps Avilas 77a, Virage Front and Rear.  8 lbs, 2 oz total.
WiZzY

Custom BakaBoards LDP, bennett 5.0 front, randal 125 rear pink bigzigs @ 8.2 lbs
pavedwave

Rollsrolls carbon/kevlar Sportster, Gullwing Cruiser60 front, Randal 160 rear, 97mm Abec11 Flywheels, 1/2" risers.  8 lbs 12 oz.
SoloRider

Where are the pictures?

1. LDP deck - Bennett 5.0, 129 RT-S, pink BigZigs - 8.44 lbs



2. Pusher - Paris 180s, O-Tang InHeats - 9.63 lbs

pavedwave

SoloRider wrote:
Where are the pictures?

Well, on this thread I was originally thinking picture-low, data-high, breaking with tradition of lots 'o visuals... but sure why not?

I just heard the old "half pound Avila" thing on the Fish one too many times today, and decided to go weigh some random unmounted wheels.   While it's true Avilas are 8 ounces a piece, here's some weights of other wheels for comparison.  The range is around 0.5--1 ounce per wheel difference -- at the very most, except for the big 101's.  I haven't weighed my Abec11 97mm's, I'm not so bored that I want to start taking my boards apart just for this.



SoloRider

3. New LDP deck - Seismic 155s, reversed BigZigs - 9.34 lbs

Gecko

Pulse with 6.0 Bennett, 149 RT/s and split Zigs - 7.6 pounds
Fatboy with 4.3 Bennett, Airflow and Minus 5s - 9.4 pounds

Crappy cell phone pics - Weightless.


LDPanda

Gecko, with such large wheels in front with a bennett 4.3, have you had any problems with truck bite or wedge bite? I got bit hard with avilas in front, the inner lip hit the wedging and tossed me bad, messed up my arm for a while. Im getting them trimmed down so i that doesnt happen again and using bigzigs in the meantime. Just be careful. How do those minus 5s ride?
Gecko

I haven't had any problems yet on that one.
I tried them briefly on the Pulse and felt a bit of bite, but that was likely the board, not the hanger/riser.  Most of the extra width is on the outer side of the wheel.  If I get curious enough, I'll pull one off and a Zig and compare the depth of the inside.

I'm waiting on some Avilas, I was going to try something narrower in the front and keep these monsters in the back.  They really grip!
pavedwave

Rollsrolls carbon/kevlar Sportster (yellow one), Randal 150mm front and rear, 77mm light blue Seismic Speed Vents, Khiro angled wedges stacked on each other for vibration dampening. - 7 lbs 6 oz.

       pavedwave longboarding Forum Index -> Setups - completes, components, and everything else
Page 1 of 1
Create your own free forum | Buy a domain to use with your forum